MULTISTAGE PUMP
C, KCP, VC, CS
The C type range is the basic range of our centrifugal ring section multistage pumps. The simplified design, utilizing hydraulically balanced impellers by means of holes into impeller, or by “back to back” impeller execution, provides the optimum pumping solution for medium pressure applications. Pump casing is consisted of suction and discharge housing, middle chambers and bearing brackets. All of the impellers are centrifugal of closed type, and are statically and dynamically balanced.
Technical data:
Capacity: 0,35 - 85 l/s
Head: 1 - 650 m
Temperature: up to 160 °C
Applications:
- Agriculture irrigation
- Boiler feed
- Chemical and light hydrocarbon transfer
- Coating and surface treatment
- High rise building sprinklers
- Paper mill shower water
- Pressure boosting systems
- Sanitary wash down services
- Rotating equipment lube and seal oil supply
Advantages:
- Impellers which are unloaded of axial force (balanced impellers) a very little axial force is transmitted on the bearings
- Pumps type KCP 122 and KCP 182 are totally unloaded of the axial force
- Relative small dimensions concerning to the performances.
Pos. |
Component |
Material |
| 1 | Pump Case | Cast Iron |
| 2 | Impeller | Cast Iron, Bronze |
| 3 | Shaft | Stainless steel |
| 4 | Shaft sleeve | Hardened Stainless steel |
| 5 | Middle chamber | Cast Iron |
| Optional materials: Cast iron (Gray, Ductile), Cast steel, SS (AISI 304, 316), Duplex SS, Super duplex SS, Bronze, AI, other on request. | ||
Shaft sealing:
The shaft sealing could be arranged by soft packing or mechanical seal.
In soft packing arrangements the shaft is protected by replaceable, stainless sleeve while the stuffing box is furnished with lantern ring for introduction of cooling liquid into the packing.
On special demand the pumps could be furnished with mechanical seal in accordance with the characteristics of the liquid and the operating conditions.
Drive:
- Electric motor
- Diesel motor
Arrangements:
Multistage type of pumps could be arranged in:
- Horizontal version C, KCP
- Vertical version VC, CS
- Cooling system KCP
Customer Values
After-Sales service
• Each product - susceptible to installation and commissioning by a specialized work team;
• Our prime goal - to make our customers’ equipment work more efficiently and trouble-free
Warranty
MZT Pumpi provides warranty for 12 months from the start of functioning, but not more than 18 months from its delivery
Contact Information
Str. Pero Nakov bb,
1000 Skopje,
Republic of Macedonia
Tel:
+389 (0)2 254 98 17
+389 (0)2 254 98 18
Fax/tel:
+389 (0)2 254 98 33
+389 (0)2 254 98 34
Web: www.pumpi.com.mk
E-mail: info@pumpi.com.mk