SPLIT CASE DOUBLE SUCTION PUMP
D
Horizontal Split Case Double Suction Centrifugal Pumps D are engineered to pump clean water or low viscosity clean liquids at moderate heads more economically than any other type of pump. All fabricated parts are standardized and accurately machined for true alignment, increasing overall durability. Impellers are statically and dynamically balanced and constructed with double inlets, practically eliminating the axial thrust and resulting in high operating efficiency.
Technical data:
Capacity: 22 - 3000 l/s
Head: 10 - 140 m
Temperature: up to 90 °C
Applications:
For liquid transfer and circulation of cold clean or slightly polluted water. Typical applications in:
- Municipal water supply
- Power plants
- Industrial plants
- Boiler feed and condensate systems
- Irrigation and dewatering
- General purposes
Drive:
- Electric motor
- Diesel motor
Arrangements:
Split case suction pump - D type of pumps could be arranged in horizontal version
Pos. |
Component |
Material |
| 1 | Pump Case | Cast Iron |
| 2 | Impeller | Cast Iron |
| 3 | Shaft | Stainless steel |
| 4 | Shaft sleeve | Stainless steel |
| 5 | Bearing bracket | Cast Iron |
| Optional materials: Cast iron (Gray, Ductile), Cast steel, SS (AISI 304, 316), Duplex SS, Super duplex SS, Bronze, AI, other on request. | ||
Shaft sealing:
The shaft sealing could be arranged by soft packing or mechanical seal.
In soft packing arrangements the shaft is protected by replaceable, stainless sleeve while the stuffing box is furnished with lantern ring for introduction of cooling liquid into the packing.
On special demand the pumps could be furnished with mechanical seal in accordance with the characteristics of the liquid and the operating conditions, including the possibility of sealing with cartridge mechanical seal.
Advantages:
- Single stage, medium pressure double inlet centrifugal pump with two flanged bearing frame, suitable for flexible coupling to electric motor or internal combustion engine as a driver.
- Ample dimensioned shaft guided through roller bearings and hardened shaft sleeve.
- Fully-enclosed single piece casting, double inlet impeller practically doesn’t produce any axial trust.
- High operating reliability due to maintenance and service parts.
- Spiral housing axially spitted means easy maintenance without pipe disconnection
Customer Values
After-Sales service
• Each product - susceptible to installation and commissioning by a specialized work team;
• Our prime goal - to make our customers’ equipment work more efficiently and trouble-free
Warranty
MZT Pumpi provides warranty for 12 months from the start of functioning, but not more than 18 months from its delivery
Contact Information
Str. Pero Nakov bb,
1000 Skopje,
Republic of Macedonia
Tel:
+389 (0)2 254 98 17
+389 (0)2 254 98 18
Fax/tel:
+389 (0)2 254 98 33
+389 (0)2 254 98 34
Web: www.pumpi.com.mk
E-mail: info@pumpi.com.mk