SCP Pump

END SUCTION CENTRIFUGAL PUMPS according ISO 2858

SCP

Horizontal, radial split volute casing pump in back pull-out design, with radial impeller, single entry, single stage, centrifugal end-suction pump with flanged bearing frame, suitable for flexible coupling to electric motor or internal combustion engine as a driver. High operating reliability due to maintenance and service optimized parts.

Technical data:

Capacity Q: up to 2500 m³/h 700l/s
Heads H: up to 150m
Pump size DN 32 to 400
Operating pressure p: up to 25 bar
Operating temperatures t: -40 to +350

Applications:

For liquid transfer and circulation of cold and hot clean or slightly polluted water, for handling aggressive organic and inorganic liquids in the chemical and petrochemical industries. Typical applications in:

  • Municipal water supply
  • Food staffs industry
  • Domestic water supply
  • Industrial plants
  • Boiler feed and condensate systems
  • Irrigation and dewatering
  • General purposes and etc.

Advantages:

  • Simple design
  • Easy maintenance
  • High performances
  • Long experience life

Pos.

Component

Material
1 Pump Case Cast Iron
2 Impeller Cast Iron
3 Shaft Stainless steel
4 Shaft sleeve Stainless steel
5 Bearing bracket Cast Iron
6 Pump cover Cast Iron
Optional materials: Ductile iron, Cast steel, SS (AISI 304, 316), Duplex SS, Super duplex SS, Bronze, AI, other on request.
3D

Shaft sealing:

The shaft sealing could be arranged by soft packing or mechanical seal. In soft packing arrangements the shaft is protected by replaceable, stainless steel sleeve while the stuffing box is furnished with lantern ring for introduction of cooling liquid into the packing. Also as a standard design the pumps could be furnished with mechanical seal in accordance with the characteristics of the liquid and the operating conditions. Single mechanical seals are according EN 12756 (DIN 24960). Conversion from the gland packing to the mechanical seal is possible without any rework on the casing cover by using the relevant replacement parts.

Drive:

  • Diesel motor
  • Electric motor

Arrangements:

SCP type of pumps could be arranged in several modifications, depending on:

  • Customer requirements,
  • Working and medium conditions,
  • Space available,
  • Applications where a special design is needed.

Testing and Guarantees:

  • Material certificates: EN 10204
  • Hydrostatic test: 150 % over nominal pressure
  • Performance tests: in accordance with ISO 9906
  • Warranties are given within the scope of the valid delivery conditions.

Customer Values

After-Sales service

• Each product - susceptible to installation and commissioning by a specialized work team;

• Our prime goal - to make our customers’ equipment work more efficiently and trouble-free

Warranty

MZT Pumpi provides warranty for 12 months from the start of functioning, but not more than 18 months from its delivery

Contact Information

Str. Pero Nakov bb,
1000 Skopje,
Republic of Macedonia

Tel:
+389 (0)2 254 98 17
+389 (0)2 254 98 18

Fax/tel:
+389 (0)2 254 98 33
+389 (0)2 254 98 34

Web: www.pumpi.com.mk
E-mail: info@pumpi.com.mk


MZT PUMPI © 2009