Please click on the links to view the appropriate list of references.
Click again to retract the list back.
Download full reference book
References for pumps
01 Water supply
JKP Vodovod Bitola
For the purposes of the water utility company in the city of Bitola, MZT Pumpi in Skopje manufactured one deep well pump, fully equipped with motor for transport of potable water.
KUR "Prishtina"
The main purpose of the booster pump station "Besi" was providing additional quantity of drinking water ( 0,9 m3/s ) for water supplying town of Pristina
02 Energy sector
Beogradske Elektrane Serbia
Manufacture and delivery of 5 centrifugal pump sets.
Belgrade Heating Plants
The main objective of the project was extending the existing heating system in Belgrade, Serbia. Four pump stations were equipped with new pump equipment.
MINEL - Serbia
Manufacturing of end suction centrifugal pumps for transport of cold and hot water in Belgrade Heating Plants, Serbia
03 Oil and oil products
Lukoil Stip
The main aim of this project was to install petrol pumps at plant station in Stip for oil and oil derivats. The pumps are used for decanting oil derivates.
Okta Refinery
Production and delivery of fire fightin diesel unit type DPA 25 SP 50/470
El-Tec Mulej
Production and delivery of 6 systems of Screw Spindle pumps with filter for unloading and transport of masut indented to be installed in Serbian heating plants.
Improm Belarus
3 pump units (2 vertical multistage centrifugal type of pumps and 1 single stage centrifugal type of pumps) were specially designed for the need of the National Oil Company Belorusneft from Republic of Belarus
Feronikel Complex Glogovac
The main objective of the project was rehabilitation of pump station for transport of technical water from Bivolak to the Feronikeli plant in Drenas
Feronikel Plants Glogovac
The system for crude oil was complete rehabilitated in Feronickel Glogovac – production plant. And thermal isolation was successfully installed, tested and putted in operation.
Mittal Steel Zenica
Reparation of pumps for diferent kind of mediums, water treatment Equipment. Reparation of lubrication systems with maximum pressure up to 250 bar.
04 Marine
Dong Il Ent
Production and delivery of 7 Screw Spindle pumps for the needs of Daewoo Shipbuilding & Marine Engineering.
05 General service pumps
US Steel Serbia
The purpose of the project was increasing the furnace capacity. In the project were predicted new pumps with double flow capacity existing. A new pump station for back water was constructed and equipped with new pumps.
Direction of Protection and Saving
Production and delivery of mobile pump units, ready for traffic participation, with installed signal and breaking devices, suitable for pulling and protected of atmospheric influences.
Mittal Steel Zenica
Reparation of pumps for diferent kind of mediums, water treatment Equipment. Reparation of lubrication systems with maximum pressure up to 250 bar.
Feronikel Complex Glogovac
The main objective of the project was rehabilitation of pump station for transport of technical water from Bivolak to the Feronikeli plant in Drenas
Vatvedt Technology AS
The main objective of the project was equipping of the gas cleaning plant in NewCo Ferronickeli – Kosovo with new high pressure pumps which would enable more effective and trouble-free operation of the plant
References for engineering
01 Steel construction
Skopski Leguri Steel construction
Manufacturing of steel construction for a cleaning gas system, from roto-furnace of about 300 tons steel construction and assembly of filter comprised of about 200 tons of steel construction
Mittal Steel Zenica
Reparation of pumps for diferent kind of mediums, water treatment Equipment. Reparation of lubrication systems with maximum pressure up to 250 bar.
02 Waste water treatment
JP Lisice
Environmental protection project for transport of untreated wastewater from east Skopje to a wastewater treatment plant – Lisice.
JKP Proakva Struga
Environmetal protection of Ohrid lake. Rehabilition of the waste water treatment plant, Struga-Macedonia.
JKP Proleter
The main scope of this project was protection of Lake Prespa from further pollution by untreated wastewater through immediate measures.
03 Pumping stations
Skopski Leguri Steel construction
Manufacturing of steel construction for a cleaning gas system, from roto-furnace of about 300 tons steel construction and assembly of filter comprised of about 200 tons of steel construction
KUR "Prishtina"
The main purpose of the booster pump station "Besi" was providing additional quantity of drinking water ( 0,9 m3/s ) for water supplying town of Pristina
Feronikel Complex Glogovac
The main objective of the project was rehabilitation of pump station for transport of technical water from Bivolak to the Feronikeli plant in Drenas
Feronikel Plants Glogovac
The system for crude oil was complete rehabilitated in Feronickel Glogovac – production plant. And thermal isolation was successfully installed, tested and putted in operation.
04 Mining equipment
Metso Minerals
Steel construction fabricated with welding of elements of hotrolled steel sheet, completed of steel tanks covered at bottom with special rubber and platform with fence on the top of the tanks.
Buchim
Manufacturing, delivery and install of 3 booster sets for a pumping station in Buchim mine – Radovish, Macedonia
UNDP
Manufacturing, delivery and install of 1 booster set for Buchim mine – Radovish, Macedonia, funded by UNDP.
05 Separation plants and equipment
Alpine Granit Serbia
The main aim of this project was production of the complete steel construction under the documentation of Metso and errection under the supervision of Metso.
Granit Skopje
The main purpose of the silos is warehousing of dry cement. One silos has the following dimensions:diameter 2,9 m, height 13,5 m and the total volume is 80 m3.
Beheluli Sh.P.K.
The main aim of this project was to design and produce all the steel construction components for the sand / gravel separation plant in which the Metso's cone crusher HP 200, Deck Screens and Vibro Freeders had to be mounted.
Filip Engineering
The main aim of this project was receiving more granulations from crushing stone.
Kirov JSCo
The main aim of this project was to design and produce whole steel construction for conveyors, which includes feed hopper, conveyor belts, side walkways etc.
Rafaelo
The main aim of this project was to design and produce all the steel construction components for the sand / gravel separation plant.
Metso Minerals
The main aim of this project was to design and produce all steel construction components for the separation. Assembly and crushing machines from Metso Minerals.
Put Bar
The main aim of this project was to design and produce all steel construction components for the crushing and separation plant. The overall project was performed by METALEX
Buchim mine – Radovish, Macedonia
Manufacturing, delivery and install of 3 booster sets for a pumping station in Buchim mine – Radovish, Macedonia
Contact Information
Str. Pero Nakov bb,
1000 Skopje,
Republic of Macedonia
Tel:
+389 (0)2 254 98 17
+389 (0)2 254 98 18
Fax/tel:
+389 (0)2 254 98 33
+389 (0)2 254 98 34
Web: www.pumpi.com.mk
E-mail: info@pumpi.com.mk